tight joint मीनिंग इन हिंदी

अधिक: आगे

You will be able to cut tight joints on any of them.
Soldering produces electrically-conductive, water-and gas-tight joints.
The result is that the ferrule seals the space between the pipe, nut, and receiving fitting, thereby forming a tight joint.
As the tail end of the rivet does not break through the bottom sheet it provides a water or gas tight joint.
One problem is that it is difficult to sweep into a tight joint because it becomes rather pebbly as it is swept.
Good old-fashioend Adirondack chairs, one of the most comfortable wood chairs you can buy or build, sometimes have these tight joints where water can collect.
The contractor responded that the handyman was full of balloon juice ( hot air ), that the vinyl siding interlocks into a tight joint that water will not penetrate.
This was more effective than the existing mechanical riveting machines, which usually did not make steam-tight joints in the boilers of steamships, which were by then operating under higher pressure than before.
A tight joint formed by the rivet body remains, the head of the mandrel remains encapsulated at the blind side, although variations of this are available, and the mandrel stem is ejected.
A . A skimcoat might be good for looks, but unlikely to prevent future leaks; the hydraulic cement, which expands as it sets, has made very tight joints, and basically that is all you want.